NOTE: If you disable this option,
the numeric keypad on the
notebook keyboard will not
function even if the Num Lock
indicator is on. However, an
externally-connected keyboard is
not affected by this feature.
Setup Configuration Utility 5-6
Resolution Expansion
The "Resolution Expansion" item, when enabled, enlarges the
display area on the LCD screen.
When this item is selected, no submenu will display. A check mark
( √ ) indicates Enabled; an underline ( _ ) indicates Disabled.
The default setting is Enabled.
The Security pull-down menu, as shown below, contains the Security
settings that safeguard your system against unauthorized use.
Security
System Password
The followings describe in sequence all the items of the Security
menu.
System Password
The "System Password" item allows you to set the password for your
system. The password is required for starting up the system and
running the SCU program.
When the item is selected, the submenu will display as shown below.
When setting a password, first make sure that Num Lock is off, then
type your
password in the entry field and press [Enter]. Confirm your password
by typing it again and pressing [Enter].
For the password to take effect, enable the "Enable Password" item.
System Password
Enter old Power-On Password: ........
Enter new Power-On Password: ........
Verify new Power-On Password: ........
[ ] Enable Password
Security Menu
My Presario – Getting Started