HP Compaq Presario,Presario 2813 Supplementary Manual page 2

Application Restore
With the Compaq Application Restore CD, you can selectively restore applications,
drivers, and utilities.
If you are restoring more than one application, wait until all applications have been
installed, if possible, before restarting your notebook.
If the application requires that you restart the notebook after installation, you will be
returned to the application selection panel to select another application to restore after
the system reboots.
Before You Begin
1. Connect the computer to an external AC power source.
2. Close any open applications.
3. Ensure that a CD-ROM drive is inserted or connected to the notebook.
Restoring Applications
1. While running Windows, insert the Compaq Application Restore CD into the
CD-ROM drive.
If autorun is enabled, go to step 2.
If autorun is not enabled, select Start > Run. Type:
x:\program\autorun.exe
(where
2. Follow the instructions on the screen.
© 2002 Comaq Information Technologies Group, L.P. Compaq and the Compaq logo are trademarks of Compaq
Information Technologies Group, L.P. in the United States and/or other countries. All other product names
mentioned herein may be trademarks of their respective companies.
Confidential computer software. Valid license from Compaq required for possession, use, or copying. Consistent
with FAR12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical
Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.
Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this
document is provided "as is" without warranty of any kind and is subject to change without notice. The warranties
for Compaq products are set forth in the express limited warranty statements accompanying such products. Nothing
herein should be construed as constituting an additional warranty.
First Edition April 2002
280170-371
x
is your CD-ROM drive designation), then click the OK Button.