To Change The Boot Device - HP Compaq Presario,Presario 2106 Startup Manual

Basic Operation
Operating Your Notebook
• Press the power button for at least 4 seconds until the display shuts down.
Unsaved data will be lost. Press the power button again to restart.
–or, if this fails–
• Insert the tip of a ballpoint pen into the reset button on the bottom of the
notebook, and then press the power button to restart.
Series 2100 and 1050v
Series 2500

To change the boot device

The notebook normally boots from its internal hard disk. You can also boot the
notebook from a floppy disk drive, a CD-ROM drive, or an internal network
interface card.
1. Select Start > Turn Off Computer > Restart.
20 Startup Guide