HP Compaq Presario,Presario 1234 Brochure page 15

Compaq Global Mini PCI 56k (V.90) Modem by 3Com
Qn Result Code Control
Result codes are informational messages sent from the modem and displayed on your
monitor. Basic result codes are OK, CONNECT, RING, NO CARRIER, and ERROR.
Also sometimes referred to as "quiet" mode, the Q setting controls the level of result
codes generated by the modem.
Q0
Q1
Q2
Result Codes:
Sn Read/Write an S-Register
Sets the register r to the specified value n.
The Sr? command reads (displays) the value in register r.
Q$
Qr=n
Qr$
Result Codes:
S$ Display Online Help for S-Registers
Displays online Help for S-registers.
Vn Result Code Form
Determines the type of result code. The V command determines if the result code is sent
as words or numbers.
V0
V1
Result Codes:
Result Code Format
0203-0799-A
Display result codes (default).
Quiet mode; no result codes.
Displays result codes only in Originate Mode.
OK n = 0 - 2.
ERROR Otherwise.
Display the list of S-register settings.
Set S-register "r" to "n".
Display the value of S-register "r".
OK n = $, r = n, r$.
ERROR Otherwise.
Display result codes in numeric form.
Display result codes in verbose form (words).
OK n = 0, 1.
ERROR Otherwise.
ATV0
<numeric code><CR>
ATV1
<CR><LF>
<verbose code><CR><LF>
15
White Paper