Step 5: Set Up Windows
Your notebook has the Microsoft Windows operating system
preinstalled on its hard drive. The first time you turn on your
notebook, the Windows Setup program runs automatically and
includes opportunities to customize your setup.
1. Follow the Setup program instructions on the screen. If
the program prompts you to enter the Product ID code,
locate the code on the bottom of the notebook.
2. Check the modem country or region settings. Select
Start > Control Panel > Printers and Other Hardware >
Phone and Modem Options, then choose your country/region.
Using the Documentation Library CD
Information about using the notebook can be found on the
Documentation Library CD included with the notebook.
To view a guide:
1. Insert the Documentation Library CD into a CD or DVD
drive. If autorun is enabled, the reference library menu is
displayed on the screen (this may take a few seconds).
2. Select the guide you want to read from the reference
library menu.
3. If prompted, accept the Adobe Acrobat Reader license
agreement or install Acrobat Reader by following the
instructions on the screen.
Startup Guide
Getting Started with Your Notebook
1–15