HP Compaq nx9500 Series Maintenance And Service Manual page 40

Troubleshooting
Select
Device Options (continued)
HDD Self Test Options
*Video modes vary even within regions. However, NTSC is common in North
America; PAL, in Europe, Africa, and the Middle East; NTSC-J, in Japan; and
PAL-M, in Brazil. Other South and Central American regions can use NTSC,
PAL, or PAL-M.
2–8
Table 2-3
Advanced Menu (Continued)
To Do This
■ Change the parallel port mode from Enhanced
Parallel Port (EPP, the default setting) to
standard, bidirectional, EPP, or Enhanced
Capabilities Port (ECP).
■ Set video-out mode to NTSC (default), PAL,
NTSC-J, or PAL-M.*
■ Enable/disable all settings in the SpeedStep
window. (When Disable is selected, the
notebook runs in Battery Optimized mode.)
■ Specify how the notebook recognizes multiple
identical docking devices that are identically
equipped. Select Disable to recognize the
docking device as a single docking device;
select Enable to recognize the docking devices
individually, by serial number.
■ Enable/disable the reporting of the processor
serial number by the processor to the software.
Run a quick comprehensive self test on hard
drives in the system that support the test features.
Maintenance and Service Guide