Display Assembly - HP Compaq nx9500 Series Maintenance And Service Manual

Removal and Replacement Procedures

5.10 Display Assembly

For use with all models
17.0-inch, WXGA+
15.4-inch, WXGA
For use with HP zd7000 models
17.0-inch, WSXGA+
1. Prepare the notebook for disassembly
2. Remove the keyboard
3. Remove the keyboard cover
4. Disconnect the display cable 1, and then remove it from the
retaining clip 2 in the top cover.
5. Remove the 2 antenna cables from the hole and routing
channel in the top cover 3.
6. Remove the 2 PM2.5×8.0 screws 4 that secure the display
assembly to the notebook.
Removing the Display Assembly Screws
5–24
Spare Part Number Information
(Section 5.8).
(Section
Maintenance and Service Guide
344894-001
344893-001
365895-001
(Section 5.3).
5.9).