S-Video Connection - HP Compaq NX9100 Reference Manual

Using the Expansion Base
3. Verify that your television is displaying the correct video
source. Refer to your television documentation for
instructions.
4. Press
mode. Press
video modes.
5. Refer to the instructions provided with your notebook to
configure the television as the primary display or to configure
advanced video features.

S-Video Connection

To connect through S-Video:
1. Connect an S-Video cable (not included) into the S-Video
jack on the back of the Expansion Base 1.
2. Connect the other end of the cable into the S-Video jack on
your television 2. Refer to your television documentation
for the connector location.
2–14
on the notebook to change your video output
fn+f4
repeatedly to cycle through the available
fn+f4
Reference Guide