Identifying Parts Of The Notebook - HP Compaq NX9020 Startup Manual

Getting Started with Your Notebook
Ä
CAUTION: To reduce the risk of fire, use only No. 26 AWG or
larger telecommunications line cord to connect a modem to the
telephone wall jack. In Australia, the notebook must be connected to
the Telecommunication Network through a line cord that meets the
requirements of ACA Technical Standard TS008.
When using your notebook with a telephone connection, always
follow basic safety precautions to reduce the risk of fire, electrical
shock, and injury to persons.
Do not use this product with a telephone connection near
■
water (for example, near a bathtub, sink, swimming pool, or
in a wet basement).
Avoid using a telephone connection (other than a cordless
■
type) during an electrical storm. There may be a remote risk
of electrical shock from lightning.
Do not use a telephone connection to report a gas leak in the
■
vicinity of the leak.
Use only the power cord and battery packs indicated in this
■
guide. Do not dispose of battery packs in a fire. They may
explode. Check with local codes for possible special disposal
instructions.
Disconnect the modem cable before opening the notebook
■
case or touching an uninsulated modem cable, jack, or
internal component.
Do not plug a modem cable or telephone cable into the
■
network (LAN) receptacle.

Identifying Parts of the Notebook

Components included with the notebook may vary by
geographical region and the features you selected. The following
tables identify the standard external components included with
most notebook models.
Find the illustrations that closely match your notebook to identify
your components.
1–2 Startup Guide