HP Compaq NX9000 Reference Manual page 65

Add-On Devices
Connecting External Devices
To dock to the port replicator
1. Plug in the AC adapter, then connect it to the back of the port replicator. You can
2. Remove the rubber cover from the docking connector on the bottom of the
3. Align the notebook with the locator posts on the port replicator.
4. Press the notebook down until both sides snap into place.
5. If the notebook is off, open it and press the power button to turn it on. The lights
When the notebook is docked, you can use its security connector to secure it. To
secure both the notebook and port replicator, install the cable lock in the security
connector next to the undock button. This will also lock the undock button.
Note
If a device is connected to an audio port on the notebook, any device connected to
the corresponding port on the port replicator is ignored.
56
also operate the port replicator using power from the notebook battery.
notebook.
on the port replicator turn on.
Reference Guide