To Connect An Infrared Device (Select Models Only) - HP Compaq NX9000 Reference Manual

Hp compaq nx9000: reference guide
Hide thumbs Also See for Compaq NX9000:
Table of Contents

Advertisement

Add-On Devices
Connecting External Devices
The IEEE 1394 port is a 4-wire port. If you want to connect a device that has a
6-wire plug, you can purchase a simple adapter if the device is unpowered, or a hub
if the device requires power.
Note
If you have problems making this connection, contact the device manufacturer Web
site for the latest version of the driver for the device.

To connect an infrared device (select models only)

Note
Select models include an infrared port. By default, the infrared port is not enabled,
so you must first enable it before you can use it.
If your model has an infrared port (a small, rectangular lens located on the front of
the notebook), then your notebook has wireless, serial communication capability.
That is, your notebook and other infrared devices, such as printers or other
notebooks, can communicate wirelessly using this port.
Using the infrared port
• Make sure the infrared port of your notebook and the infrared port of the device
• To check the status of communications, open Wireless Link by selecting Start >
Printing to an infrared printer
Install your printer and assign it to the notebook infrared port. You can then print
from your applications as you would to any other printer.
Transferring files through an infrared connection
You can use your notebook infrared port to transfer files by using Wireless Link. See
the Windows online Help for instructions on using Wireless Link.
54
with which you want to communicate lie in a straight line facing each other. The
two ports should be no more than one meter apart with no obstructions in
between. Noise from nearby equipment can cause transmission errors.
1. Select Start > Control Panel > Performance and Maintenance > System.
2. Select the Hardware tab.
3. Select the Device Manager button.
4. Select the ALI fast infrared controller, then the Enable Device button.
5. Select Next > Finish > Close. Then close all open dialog boxes.
Control Panel > Printers & Other Hardware > Wireless Link.
Reference Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents