Connecting Pc Cards; To Insert Or Remove A Pc Card - HP Compaq NX9000 Reference Manual

Add-On Devices

Connecting PC Cards

Connecting PC Cards
The notebook PC Card slot is available for storing data and expanding the
communication capabilities of the notebook. The notebook supports standard Type II
and III PC Cards (PCMCIA and CardBus).

To insert or remove a PC Card

Note
The location and number of the PC Card slots vary by model series.
Inserting a PC Card
1. Hold the PC Card label-side up with its connectors facing the card slot.
2. Slide the PC Card all the way into the bottom of the slot. Most cards are properly
48
seated when the outer edge is flush with the casing of the notebook, but some
cards are designed to protrude from the case.
Reference Guide