Cd And Dvd Procedures; Inserting Or Removing A Disc - HP Compaq NX6105 Hardware And Software Manual

Multimedia

CD and DVD Procedures

Inserting or Removing a Disc

Use the following procedures to insert or remove an optical disc
such as a CD or a DVD. A disc that is playing must be stopped
before it can be removed. To stop a disc, press the
■
To insert a disc—Be sure the notebook is turned on. Then
press the release button 1 on the drive bezel to release the
media tray. Pull the tray outward 2, place the disc label-side
up on the media tray 3, and then close the media tray 4.
■
To remove a disc while the notebook is turned on—Press
the release button on the drive bezel to release the media tray.
Pull the tray outward, remove the disc, and then close the
media tray.
■
To remove a disc while the notebook is turned off:
a. Insert the end of a small object like a paper clip into
b. Press the paper clip gently into the release access until the
c. Pull the tray outward, remove the disc, and then close
4–8
the release access 5 in the front bezel of the drive.
media tray is released.
the media tray.
fn+f10
Hardware and Software Guide
hotkey.