Connecting the Video (Select Models Only)
To transmit video signals through the S-Video-out jack, you need
a standard S-Video cable, available from most computer or
electronics retailers.
Plug one end of the S-Video cable into the notebook S-Video-out
jack, illustrated below. Plug the other end of the cable into the
S-Video-in jack on the external device.
Displaying a Video Image
To display an image on the notebook display or a video device
display, both the notebook and the video device must be
turned on.
»
To switch the image between the notebook display and the
video device display, repeatedly press the
Pressing the
notebook display, the connected video device display, and
simultaneously on both displays.
For more information about
"Hotkeys"
Hardware and Software Guide
hotkey switches the image among the
fn+f4
section in
Chapter 2, "TouchPad and Keyboard."
and other hotkeys, refer to the
fn+f4
Multimedia
hotkey.
fn+f4
4–7