Initiating Or Restoring From Hibernation - HP Compaq NX6105 Hardware And Software Manual

Initiating or Restoring from Hibernation

Hibernation cannot be initiated unless it is enabled. Hibernation
is enabled by default. To verify that hibernation remains enabled,
select Start > Control Panel > Performance and
Maintenance > Power Options > Hibernate tab. If the Enable
hibernation check box is selected, hibernation is enabled.
Task
Initiate
hibernation.
Allow the
system to
initiate
hibernation.
Restore from
hibernation.
*If you have been registered to a network domain, the button you click will be
called Shut Down instead of Turn Off Computer .
†
If the system initiated hibernation because of a critical low-battery condition,
connect external power or insert a charged battery pack before you press the
power/standby button. (The system may not respond if the drained battery pack
is the only power source.)
Hardware and Software Guide
Procedure
In Windows XP Home, select
Start >Turn Off Computer.* Then hold
down shift as you select the Stand By
button.
In Windows XP Professional,
select Start > Turn Off Computer >
.
Hibernate * (If hibernate is not
displayed, press the down arrow, and
then select Hibernate from the
drop-down list.)
No action is required. If the notebook is
running on battery power and hibernation
is enabled, the system initiates
hibernation
■ After 30 minutes of notebook inactivity.
■ Whenever the battery pack reaches a
critical low-battery condition.
Press the power/standby button.
Result
■ Power/standby
lights are
turned off.
■ Screen is
cleared.
■ Power/standby
lights are
turned off.
■ Screen is
cleared.
† ■ Power/standby
lights are
turned on.
■ Your work is
returned to the
screen.
Power
3–9