Changing The Language Of The Setup Utility; Navigating And Selecting In The Setup Utility - HP Compaq NX6105 Hardware And Software Manual

Software Update and Recovery, and System Software

Changing the Language of the Setup Utility

The following procedure explains how to change the language of
the Setup utility. If the notebook is not in the Setup utility, begin
at step 1. If the notebook is in the Setup utility, begin at step 2.
1. To open the Setup utility, turn on or restart the notebook in
Windows, and then press
to enter setup" is displayed in the lower left corner of the
screen.
2. Use the arrow keys to select the Advanced menu.
3. Press
then press
4. When a confirmation prompt with your preference selected is
displayed, press
5. To set your preferences and exit the Setup utility, press
and then follow the instructions on the screen.
Your preferences are in effect when the notebook restarts in
Windows.

Navigating and Selecting in the Setup Utility

Because the Setup utility is not Windows-based, it does not
support the TouchPad. Navigation and selection are by keystroke.
■
To choose a menu or a menu item, use the arrow keys.
■
To choose an item in a drop-down list or to toggle a field,
for example an Enable/Disable field, use either the arrow
keys or
■
To select an item, press
■
To close a text box or return to the menu display, press
To display additional navigation and selection information while
the Setup utility is open, press
8–10
or (or use the arrow keys) to select a language, and
f5 f6
.
enter
enter
or .
f5 f6
while the prompt "Press <F10>
f10
to save your preference.
.
enter
.
f1
Hardware and Software Guide
,
f10
.
esc