Step 2: Connect The Computer To External Power - HP Compaq NW9440 Getting Started

Step 2: Connect the computer to
external power
✎
An older AC adapter will not work with this computer.
To connect the computer to external AC power:
1. Plug the AC adapter into the power connector 1 on the left
side of the computer.
2. Plug the power cord into the AC adapter 2.
3. Plug the other end of the power cord into an AC outlet 3.
When the computer receives AC power, the battery pack begins
to charge and the battery light (on the front of the computer)
is turned on. When the battery pack is fully charged, the battery
light is turned off.
It is recommended that you leave the computer connected to
external power until the battery pack is fully charged and the
battery light is turned off.
Getting Started
First-time setup
1–11