Using the S-Video Out Jack
To transmit video signals through the S-Video out jack, you need
an S-Video cable available from most electronics retailers.
To connect a video device to the S-Video out jack:
1. Plug either end of the S-Video cable 1 into the S-Video out
jack on the notebook.
2. Connect the other end of the cable 2 to the video device as
instructed in the device documentation.
✎
If the S-Video out jack on the notebook is not accessible because
the notebook is docked, you can connect the device to the
S-Video out jack on the optional Port Replicator.
Hardware Guide
Audio and Video
5–5