Initiating Standby (Fn+F3); Switching Displays (Fn+F4) - HP Compaq NW8000 Hardware Manual

Initiating Standby (fn+f3)

■
When the notebook is on, press the
Standby. When Standby is initiated, your work is saved in
random access memory (RAM), the screen is cleared, and
power is conserved. While the notebook is in Standby, the
Power/Standby light blinks.
■
To exit Standby, briefly press the power button.
The
fn+f3
function of the
can be changed. For example, the
initiate Hibernation instead of Standby. For more information
about Standby, Hibernation, and changing the function of the
hotkey, refer on the Documentation Library CD to the
fn+f3
Software Guide, "Power" chapter.

Switching Displays (fn+f4)

The
fn+f4
connected to the external monitor connector or the S-Video jack
on the notebook. For example, if an external monitor is connected
to the notebook, pressing the
toggle the image between the notebook display, the external
monitor display, and a simultaneous display on both the notebook
and the monitor.
Most external monitors receive video information from the
notebook using the external VGA video standard. The
hotkey can also toggle images among other devices receiving
video information from the notebook.
The following five video transmission types, with examples of
devices that use them, are supported by the
■
LCD (notebook display)
■
External VGA (most external monitors)
Hardware Guide
hotkey is set at the factory to initiate Standby. The
hotkey, called the "sleep button" in Windows,
fn+f3
hotkey switches the image among display devices
Pointing Devices and Keyboard
fn+f3
hotkey can be set to
fn+f3
hotkey multiple times will
fn+f4
fn+f4
hotkey to initiate
fn+f4
hotkey:
2–7