Accessing Computer Setup; Restoring Computer Setup Defaults - HP Compaq NW8000 Software Manual

Computer Setup

Accessing Computer Setup

The information and settings in Computer Setup are accessed
from the File, Security, Tools, and Advanced menus.
1. Open Computer Setup by turning on or restarting the
notebook. Press
message is displayed in the lower left of the screen.
❏
❏
❏
2. Select the File, Security, Tools, or Advanced menu.
3. To exit Computer Setup, choose one of the following:
❏
❏
Your preferences are set when you exit Computer Setup and
take effect when the notebook restarts.

Restoring Computer Setup Defaults

To return all settings in Computer Setup to the values that were
set at the factory:
1. Open Computer Setup by turning on or restarting the
notebook. Press
message is displayed in the lower left of the screen.
❏
❏
2. Use the arrow keys to select File > Restore defaults.
3. Select the Restore Defaults check box.
8–2
f10
To change the language, press
To view navigation information, press
To return to the Computer Setup menu, press
To exit without saving any changes, use the arrow keys to
select File > Ignore Changes and Exit, then follow the
instructions on the screen.
To exit and save all the settings you have entered, use the
arrow keys to select File > Save Changes and Exit, then
follow the instructions on the screen.
f10
To change the language, press
To view navigation information, press
while the F10 = ROM Based Setup
while the F10 = ROM Based Setup
f2.
f1.
f2.
f1.
Software Guide
esc.