Using The Speedstep Window - HP Compaq NW8000 Software Manual

Using the SpeedStep Window

(Windows 2000)
To open the SpeedStep window in Windows 2000, select Start >
Settings > Control Panel > Power Options > Intel SpeedStep
technology tab. Then set your preferences according to the
following table.
Preference
Assign a performance mode that
applies when the notebook is
running on battery power.
Assign a performance mode that
applies when the notebook is
running on external power.
Set the notebook to remain in the
same performance mode even
when the power source changes.
Remove the SpeedStep icon from
the taskbar.
Software Guide
Procedure
Select a performance mode
from the Running on Batteries
list, then select OK.
Select a performance mode
from the Plugged In list, then
select OK.
Select the same performance
mode from the Running on
Batteries and Plugged In lists,
then select OK.
1. Select the check box for
Remove Icon from Taskbar.
2. Select OK in the Advanced
window.
3. Select OK or Apply in the
main SpeedStep window.
Power
2–15