Choosing A Performance Mode; Setting Speedstep Preferences - HP Compaq NW8000 Software Manual

Power
To access the utility after installation, select the SpeedStep icon
on the taskbar, or select Start > Settings > Control Panel > Power
Options > Intel SpeedStep technology tab.
The SpeedStep icon on the taskbar indicates which SpeedStep
mode is active. Hover the mouse pointer over the icon to display
the current performance mode. Right-click the icon to change the
performance mode.

Choosing a Performance Mode

(Windows 2000)
The SpeedStep technology offers 3 preset performance modes:
■
Maximum Performance mode–the processor runs at full
speed to provide maximum performance.
■
Automatic mode–the processor speed increases when the
notebook is being used and decreases when the notebook
is idle.
■
Battery Optimized mode–the processor runs at reduced
speed to provide an optimal balance between energy
conservation and performance.
The notebook can run in any of the performance modes while it is
operating on external power or on battery power.

Setting SpeedStep Preferences

(Windows 2000)
SpeedStep settings can be accessed from the SpeedStep window
or the SpeedStep icon. SpeedStep can be enabled or disabled in
Computer Setup.
✎
If the SpeedStep window and icon are not accessible, they can be
enabled in Computer Setup. To enable the window icon and other
settings, refer to
(Windows 2000),"
2–14
"Enabling SpeedStep in Computer Setup
later in this chapter.
Software Guide