Create Recovery Discs (Recommended - HP Compaq NC8430 Getting Started

Create recovery discs (recommended)

After setting up the computer for the first time, you can create a
set of recovery discs of your full factory image using HP Backup
and Recovery Manager. The recovery discs are used to start up
(boot) your computer and restore the operating system and
software applications to factory settings in case of system failure
or instability.
Ä
CAUTION: After you create the recovery discs, you can increase the
amount of space on the hard drive by deleting the recovery partition.
However, doing this is not recommended. If you delete this partition, you
will lose any information that is on the partition.
✎
Only one set of recovery discs can be created for this computer.
Before creating recovery discs:
■�
Use high quality CD-R, DVD-R, or DVD+R media.
(purchased separately)
✎
■�
Number each disc before inserting it into the computer
optical drive.
■�
If necessary, you can exit the program before you have
finished creating the recovery discs. The next time you
open HP Recovery Media Creator, you will be prompted
to continue the disc creation process where you left off.
Getting Started
DVD±RW/R and double-layer DVD±RW are not
compatible with the HP Backup and Recovery Manager
software.
Backup and recovery
C–7