Initiating Or Resuming From Standby - HP Compaq NC6220 Hardware And Software Manual

Initiating or Resuming from Standby

Task
Initiate standby.
Allow the system
to initiate
standby.
Resume from
user-initiated or
system-initiated
standby.
Hardware and Software Guide
Procedure
■
With the notebook on,
press fn+f3.
■
Close the display.
■
Select Start > Turn Off
Computer > Standby.
(If the standby option
is not displayed, press
the shift key.)
No action required.
■
If the notebook is running
on battery power, the
system initiates standby
after 10 minutes of
notebook inactivity.
(Default setting)
■
If the notebook is
attached to external
power, the system does
not initiate standby.
Power settings and timeouts
can be changed in the Power
Options window.
■
Press and release the
power button.
■
If the display was closed
while the notebook was
in standby, open the
display.
Result
■
The power/standby
lights blink.
■
The screen clears.
■
The power/standby
lights blink.
■
The screen clears.
■
The power/standby
lights are turned on.
■
Your work returns to
the screen.
Power
2–11