Entering Drivelock Passwords; Requiring A Drivelock Password At Restart - HP Compaq NC6220 Hardware And Software Manual

Entering DriveLock Passwords

1. Be sure that the hard drive is inserted into the notebook
(not into an optional docking device or external MultiBay).
2. When prompted for a DriveLock password, type your user
or master password (using the same kind of keys you used
to set the password), and then press
✎
After 2 incorrect attempts to enter the password, you must
restart the notebook and try again.

Requiring a Drivelock Password at Restart

You can require that a DriveLock password be entered each time
the notebook is restarted. Enable and disable this feature in
Computer Setup:
1. Shut down the notebook. If you are not sure whether the
notebook is off or in hibernation, turn the notebook on by
pressing the power button, and then shut down the notebook
through the operating system.
2. Be sure that the hard drive is inserted into the notebook
(not into an optional docking device or external MultiBay).
3. Open Computer Setup by turning on or restarting the
notebook. Press
message is displayed in the lower-left corner of the screen.
❏
❏
Hardware and Software Guide
f10
To change the language, press
For navigation instructions, press
while the F10 = ROM Based Setup
f2.
enter.
f1.
Security
12–15