Displaying Optical Disc Contents; Avoiding Standby Or Hibernation - HP Compaq NC6220 Hardware And Software Manual

Displaying Optical Disc Contents

When an optical disc is inserted into a drive and autorun is
enabled, the contents of the disc display on the screen.
To display the contents of a disc when autorun is not enabled:
1. Select Start > Run, and then type:
x:
where x is the designation of the drive containing the disc.
2. Press

Avoiding Standby or Hibernation

CAUTION: To prevent possible video degradation and loss of audio or
Ä
video playback functionality, do not initiate standby or hibernation
while playing any type of media.
If standby or hibernation is accidentally initiated while a drive
medium (such as a diskette, CD, CD-RW, or DVD) is in use, the
following results may occur:
■
Your playback may be interrupted.
■
You may see the following warning: "Putting the computer
into hibernation or standby may stop the playback. Do you
want to continue?" Select No.
Resume from standby or restore from hibernation by pressing the
power button to the left or right. Audio or video may resume or
you may need to restart the medium.
Hardware and Software Guide
enter
.
Drives
5–15