Step 2: Connect The Computer To External Power - HP Compaq NC6320 Getting Started Manual

First-time setup
Step 2: Connect the computer to
external power
To connect the computer to external AC power:
1. Plug the AC adapter into the power connector 1 on the
computer.
2. Plug the power cord into the AC adapter 2.
3. Plug the other end of the power cord into an AC outlet 3.
When the computer receives AC power, the battery pack begins
to charge and the battery light (on the front of the computer) 4
is turned on. When the battery pack is fully charged, the battery
light is turned off.
1–16 Getting Started