Removal And Replacement Preliminaries; Tools Required - HP Compaq NC6110 Maintenance And Service Manual

Removal and Replacement
This chapter provides essential information for proper and
safe removal and replacement service.

5.1 Tools Required

You will need the following tools to complete the removal and
replacement procedures:
■
Magnetic screwdriver
■
Phillips P0 screwdriver
■
Torx8 screwdriver
■
5.0-mm socket for system board locks
■
Flat-bladed screwdriver
■
Tool kit—includes connector removal tool, loopback plugs,
and case utility tool
Maintenance and Service Guide
Preliminaries
5
5–1