Computer Setup Defaults
To return all settings in Computer Setup to the values that were
set at the factory:
1. Open Computer Setup by turning on or restarting the
notebook, and then pressing
Setup" message is displayed in the lower-left corner of the
screen.
❏
❏
2. Use the arrow keys to select File > Restore defaults, and
then press
3. Select the Restore Defaults check box, and then press
4. To confirm the restoration, press
5. To save your preferences and exit Computer Setup, use the
arrow keys to select File > Save Changes and Exit, Then
follow the instructions on the screen.
Your preferences are in effect when the computer restarts.
✎
Your password and security settings are not changed when you
restore the factory default settings.
Hardware and Software Guide
To change the language, press
To view navigation information, press
.
enter
while the "F10 = ROM Based
f10
.
f2
.
f10
Computer Setup
.
f1
enter
.
9–3