Multiboot Preferences; Setting A New Default Boot Order - HP Compaq NC6110 Hardware And Software Manual

MultiBoot

MultiBoot Preferences

There are 2 ways to set MultiBoot sequences:
■
Set a new default boot sequence that the notebook uses each
time it starts up.
■
Use variable boot sequences using MultiBoot Express. This
feature prompts you for a startup device each time the
notebook is started or restarted.

Setting a New Default Boot Order

To set a boot device order that the notebook uses each time it is
turned on or restarted:
1. Open Computer Setup by turning on or restarting the
notebook, and then pressing
Setup" message is displayed in the lower-left corner of the
screen.
❏
❏
2. Use the arrow keys to select the Advanced menu > Boot
Options, and then press
3. Toggle the MultiBoot field to Enable.
4. Toggle the Boot Order fields to the boot sequence that you
prefer.
5. To save your preferences and exit Computer Setup, use the
arrow keys to select File > Save Changes and Exit. Then
follow the instructions on the screen.
Your preferences are in effect when the notebook restarts.
8–6
To change the language, press
For navigation instructions, press
while the "F10 = ROM Based
f10
.
f2
.
f1
.
enter
Hardware and Software Guide