Setting System Information Options - HP Compaq NC6110 Hardware And Software Manual

Setting System Information Options

1. Open Computer Setup by turning on or restarting the
computer, and then pressing
Based Setup" message is displayed in the lower-left corner of
the screen.
❏
❏
2. Access or set your preferences by following these directions:
❏
❏
3. To confirm the information or your preferences, press
4. To save your information or preferences, use the arrow keys
to select File > Save Changes and Exit, and then follow the
instructions on the screen.
Your preferences are in effect when the notebook restarts.
Hardware and Software Guide
To change the language, press
For navigation instructions, press
To view general system information, select File > System
Information.
To view or enter identification values for system
components, select Security > System IDs.
while the "F10 = ROM
f10
.
f2
.
f1
Security
f10.
7–19