Setting System Information Options; Using The Smart Card Reader - HP Compaq NC6000 Software Manual

Security

Setting System Information Options

1. To open Computer Setup, turn on or restart the notebook.
Press
displayed in the lower left of the screen.
❏
❏
2. Access or set your preferences by following these directions:
❏
❏
3. To confirm the information or your preferences, press
4. To save your information or preferences, use the arrow keys
to select File > Save Changes and Exit, then follow the
instructions on the screen.
Your preferences are set when you exit Computer Setup and
take effect when the notebook restarts.

Using the Smart Card Reader

Select notebooks models are equipped with an embedded Smart
Card Reader. On these models, the driver for your Smart Card
Reader is preinstalled. No action is necessary to install the driver.
The Smart Card Reader is used with industry-standard Smart
Cards designed to work with Windows 2000 and Windows XP
Professional operating systems.
3–16
while the F10 = ROM Based Setup message is
f10
To change the language, press
For navigation instructions, press
To view general system information, select the File
menu > System Information.
To view or enter identification values for system
components, select the Security menu > System IDs.
f2.
f1.
Software Guide
f10.