Using Hp Protecttools Embedded Security Manager; Using System Information - HP Compaq NC6000 Software Manual

Using HP ProtectTools Embedded
Security Manager
HP ProtectTools Embedded Security Manager is the interface that
allows you to configure settings for the optional Embedded
Security Chip that is available on select notebooks.
In order to use HP ProtectTools Embedded Security Manager,
the Embedded Security Chip must first be enabled and the
appropriate software and drivers must be installed. For
information on installing software and drivers, enabling the
Embedded Security Chip and using Embedded Security, refer to
the HP ProtectTools Embedded Security Getting Started guide,
included with notebooks containing the Embedded Security Chip.
(This guide is not provided in all languages.)

Using System Information

System information provides details about your notebook and
battery pack. The following sections explain how to prevent other
users from viewing system information and how to configure
system information options in Computer Setup.
System Information options allow you to:
■
Display or enter the notebook serial number, asset tag, and
ownership tag.
■
Display a battery pack serial number.
✎
To prevent unauthorized access to this information, you must
create an HP Administrator password. For instructions, see
"Setting HP Administrator Passwords,"
Software Guide
earlier in this chapter.
Security
3–15