Hardware And Software Setup; Setting Up The Hardware - HP Compaq NC6000 Startup Manual

334088-001.book Page 1 Friday, July 11, 2003 3:39 PM

Hardware and Software Setup

Å
WARNING: This notebook is designed to run demanding applications
at full power. As a result of increased power consumption, it is normal
for the notebook to feel warm or hot when used continuously. To avoid
potential discomfort or burns, do not block the air vents or use the
notebook on your lap for extended periods. The notebook complies
with the user-accessible surface temperature limits defined by the
international Standard for Safety of Information Technology Equipment
(IEC 60950).
✎
Because of limitations in current TFT manufacturing technology,
TFT displays may show imperfections as bright, dim, or dark
spots. HP does not guarantee that TFT displays are free from such
imperfections.
✎
For governmental agency and safety information, refer on the
Documentation Library CD to the Regulatory and Safety Notices.

Setting Up the Hardware

Ä
CAUTION: To ensure that the correct drivers load and to prevent file
corruption or damage to the components during initial setup:
I
Do not set up the notebook while it is docked in an optional Port
Replicator.
I
Do not remove the battery pack until the notebook has been
connected to external AC power.
I
Run the notebook on external power, not on battery power,
throughout initial setup.
Startup Guide
1
1–1