Usb Legacy Support - HP Compaq NC4400 User Manual

Using a USB device

USB legacy support

USB legacy support (enabled by default) allows you to
■
Use a USB keyboard, mouse, or hub connected to a USB port
on the computer during startup or in a non-Microsoft®
Windows® application or utility.
■
Start or restart from an optional external MultiBay.
To enable or disable USB legacy support:
1. Open Computer Setup by turning on or restarting the
computer, and then pressing
Setup" message is displayed in the lower-left corner of the
screen.
2. Use the arrow keys to select System Configuration > Device
configurations, and then press
3. Use the arrow keys to enable or disable USB legacy support.
4. To save your preference and exit Computer Setup, use the
arrow keys to select File > Save changes and exit. Then
follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
1–4
while the "F10 = ROM Based
f10
.
enter
External Devices