Set up the computer
To set up the computer, you will
1. Insert the battery pack into the computer.
2. Connect the computer to external power.
✎
3. Turn on the computer.
4. Set up the software.
5. Create recovery discs (recommended).
✎
CAUTION: To prevent file corruption and ensure that the correct drivers
Ä
are installed:
■
Do not set up the computer for the first time while the computer is
docked in an optional docking device.
■
During the hardware and software setup procedures:
❏
❏
Getting Started
The battery begins to charge.
Refer to Appendix C,
Do not unplug the computer from external power.
Do not shut down the computer or initiate standby or hibernation.
"Backup and
recovery," for instructions.
First-time setup
1–3