Initiating Or Resuming From Standby - HP Compaq NC4000 Hardware And Software Manual

Initiating or Resuming from Standby

Task
Initiate standby.
Allow the system
to initiate
standby.
Resume from
user-initiated or
system-initiated
standby.
Hardware and Software Guide
Procedure
With the notebook on, perform
one of the following actions:
■ Press fn+f3.
■ Close the display.
■ Select Start > Turn Off
Computer> Standby.
(If the standby option is
not displayed, press the
shift
key.)
No action required.
■ If the notebook is running on
battery power, the system
initiates standby after 10
minutes of notebook
inactivity. (Default setting)
■ If the notebook is attached
to external power, the
system does not initiate
standby.
■ Power settings and timeouts
can be changed in the
Power Options window.
Press the power/standby
button.
Result
■ The power/standby
lights blink.
■ The screen is
cleared.
■ The power/standby
lights blink.
■ The screen is
cleared.
■ The power/standby
lights are turned on.
■ Your work returns
to the screen.
Power
2–11