Usb Legacy Support - HP Compaq NC4000 Hardware And Software Manual

USB Legacy Support

You must enable USB legacy support to
■
Use a USB keyboard, mouse, or hub connected to a USB port
on the notebook during startup or in a non-Windows
application or utility.
■
Boot from an optional external MultiBay.
To enable USB legacy support:
1. Turn on or restart the notebook.
2. Press
is displayed in the lower-left corner of the screen.
❏
❏
3. Select Advanced > Device Options > Enable USB legacy
support.
4. To save your preference and exit Computer Setup, select
File > Save Changes and Exit, and then follow the
instructions on the screen.
Hardware and Software Guide
while the "F10 = ROM Based Setup" message
f10
To change the language, press
For navigation instructions, press
f2.
f1.
USB Devices
9–3