HP Compaq NC4010 Maintenance And Service Manual page 170

Power Cord Set Requirements
3-Conductor Power Cord Set Requirements (Continued)
Country
The Netherlands
Norway
Sweden
Switzerland
United Kingdom
United States
✎
NOTES:
1. The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm²
conductor size. Power cord set fittings (appliance coupler and wall plug)
must bear the certification mark of the agency responsible for evaluation
in the country where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG,
3-conductor. The wall plug must be a two-pole grounding type with a
NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a "T" mark
and registration number in accordance with the Japanese Dentori Law. The
flexible cord must be Type VCT or VCTF, 3-conductor, 1.00 mm² conductor
size. The wall plug must be a two-pole grounding type with a Japanese
Industrial Standard C8303 (7 A, 125 V) configuration.
B–4
Accredited Agency
KEMA
NEMKO
SEMKO
SEV
BSI
UL
Applicable Note Number
1
1
1
1
1
2
Maintenance and Service Guide