Step 3: Connect The Modem - HP Compaq NC4200 Getting Started Manual

Hardware Setup

Step 3: Connect the Modem

To connect the modem so that you can register your notebook
and operating system during software setup:
■
Follow the instructions in this section for connecting the
modem to an analog telephone line.
– or –
■
Follow the instructions provided by your Internet service
provider to connect the notebook to the Internet through
a DSL (Digital Subscriber Line) modem, cable modem, or
network connection. For more information about these and
other Internet connection methods, see the
Internet"
✎
It might be easier to connect your modem to a telephone line
now and set up other Internet connections later, after you have
completed software setup.
Jacks for analog telephone lines vary by country.
■
If you are connecting the modem to a telephone line in a
country where RJ-11 telephone jacks are standard, follow the
instructions in the
section next in this chapter.
■
If you are connecting the modem to a telephone line in
a country where RJ-11 telephone jacks are not standard,
follow the instructions in the
an Adapter"
Å
WARNING: To reduce the risk of electric shock, disconnect the
modem from the telephone network before accessing an internal
compartment of the notebook. Internal compartments include the
memory compartment, the battery bay, and the hard drive bay.
1–4
section in Chapter 3, "Next Steps."
"Connecting the Modem to an RJ-11 Jack"
section later in this chapter.
"Connect to the
"Connecting the Modem with
Getting Started