Connect To The Internet; Enable Communication Hardware - HP Compaq NC4200 Getting Started Manual

Next Steps

Connect to the Internet

To connect the notebook to the Internet, you must enable your
communication hardware and have an account with an Internet
service provider (ISP).

Enable Communication Hardware

Your modem is enabled when the modem cable is connected to
the notebook and to an analog telephone line.
■
If you connected the modem cable during hardware setup,
your modem is enabled. Proceed to the next section,
Internet Service."
■
If you did not connect the modem cable during hardware
setup:
a. Turn off your notebook.
b. Follow the instructions in the
c. Start your notebook in Windows.
d. Proceed to the next section,
For information about setting up a wireless device, visit
http://www.hp.com/go/wireless.
For more information about modem, wireless, cable, DSL
(Digital Subscriber Line), and network connections, select
Start > Help and Support. The Help and Support Center
provides hardware and software information, instructions,
tutorials, and wizards that can help you set up or troubleshoot
a variety of connections.
3–10
Modem" section of
"Step 3: Connect the
Chapter 1, "Hardware Setup."
"Set Up Internet Service."
"Set Up
Getting Started