Installing Optional Software - HP Compaq NC4010 Software Manual

Setup
■
This guide does not take into account any variation that might
result from the notebook being connected to a network.
■
This guide includes instructions based on the Microsoft®
Windows® XP and Windows 2000 operating systems. Any
other operating systems installed on this notebook after
purchase might not match the descriptions and procedures
provided in this guide.
■
This guide includes instructions based on the category view
that is used by default in Windows XP. If your notebook is set
to classic view, you might notice discrepancies between your
notebook and this documentation. For information on
switching views, see Windows XP Help and Support.

Installing Optional Software

You can install third-party software or preloaded utilities anytime
after initial setup is complete.
■
To install third-party software, refer to the documentation
included with the software.
■
To install a preloaded utility:
❏
❏
A setup wizard loads, and a list of applications is displayed.
Select the application you want to install, and follow the
instructions on the screen.
✎
To view the descriptions and space requirements of preloaded HP
utilities without installing them:
■
Select Start > (All) Programs > Software Setup.
After viewing the utility information, select Cancel.
1–2
In Windows 2000, select Start > Programs > Software
Setup.
In Windows XP, select Start > All Programs > Software
Setup.
Software Guide