Reinstalling Device Drivers And Other Software - HP Compaq NC4010 Software Manual

11. Select Format the partition using the NTFS file system
(Quick) and press
Ä
CAUTION: Formatting this drive will delete all current files.
12. Press
This process might take 1 to 2 hours to complete. The
notebook restarts in Windows when the process is complete.
✎
When prompted for the product key, refer to the Microsoft
Certificate of Authenticity label located on the bottom of the
notebook.
Reinstalling Device Drivers and Other
Software
After the operating system installation process is complete, you
must reinstall drivers.
For Windows 2000 installations, change the display resolution
to its highest setting prior to reinstalling the drivers. To change
display resolution, select Start > Settings > Control Panel >
Display, and select the Settings tab.
To reinstall drivers, use the Driver Recovery CD included with
the notebook:
1. While running Windows, insert the Driver Recovery CD into
the optical drive.
If you do not have Autorun enabled, select Start > Run. Then
enter
optical drive).
2. Follow the on-screen instructions for installing the drivers.
After the drivers are reinstalled, you must reinstall any software
you added to the notebook. Follow the installation instructions
provided with the software.
Software Guide
enter.
to format the drive. The reinstallation process begins.
F
D:\SWSETUP\APPINSTL\SETUP.EXE
Software Updates and Restorations
(where D indicates the
8–9