Entering Multiboot Express Preferences - HP Compaq NC4010 Software Manual

Hp compaq notebook series

Hide thumbs Also See for Compaq NC4010:

Table of Contents

MultiBoot

3. In the Express Boot Popup Delay (Sec) field, select the length

of time in seconds that you want the notebook to display the

Express Boot menu before it defaults to the current

MultiBoot setting. (When 0 is selected, the Express Boot

menu is not displayed.) This time interval is known as the

timeout.

4. To save your settings and exit Computer Setup, use the arrow

keys to select File > Save Changes and Exit, then follow the

instructions on the screen.

The new settings are saved when you exit Computer Setup.

Changes will be in effect when the notebook restarts.

Entering MultiBoot Express Preferences

When the Express Boot menu is displayed during startup:

■

To specify a startup location from the Express Boot menu,

select your preference within the timeout, then press

■

To prevent the notebook from defaulting to the current

MultiBoot setting, press any key within the timeout. The

notebook will not start up until you select a startup location

and press

■

To allow the notebook to start up according to the current

MultiBoot setting, wait for the timeout to expire.

5–6

enter.

Software Guide

Table of Contents