Enabling Devices In Computer Setup - HP Compaq NC4010 Software Manual

✎
Since no drive letter is associated with the NIC, changing the boot
order of a NIC does not affect drive letters of the other devices.

Enabling Devices in Computer Setup

The notebook can start up from a USB device or the NIC only if
that device has been enabled for inclusion in MultiBoot.
To enable a device or location for inclusion in MultiBoot:
1. Turn on or restart the notebook. Press
F10 = ROM Based Setup message is displayed in the lower
left of the screen.
❏
❏
2. Use the arrow keys to select the Advanced menu > Device
Options.
❏
❏
3. To save your preferences and exit Computer Setup, use the
arrow keys to select File > Save Changes and Exit, then
follow the instructions on the screen.
Your preferences are set as you exit Computer Setup and are
in effect when the notebook restarts.
✎
To connect a NIC to a Preboot eXecution Environment (PXE) or
Remote Program Load (RPL) server during startup without using
MultiBoot, quickly press
message appears briefly in the lower right corner of the screen.
Software Guide
To change the language, press
For navigation instructions, press
To enable bootable media in USB drives or in drives
inserted into a Port Replicator, select Enable USB legacy
support.
To enable a NIC, select Internal Network adapter boot.
F2.
when the Network Service Boot
F12
while the
F10
F1.
MultiBoot
5–3