HP Compaq NC4000 Getting Started Manual page 13

Hardware and Software Setup
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. For more informaiton, refer on the Documentation Library
CD to the Regulatory and Safety Notices.
Å
WARNING: To reduce the risk of electric shock or damage to your
equipment:
Plug the power cord into an electrical outlet that is easily
accessible at all times.
Disconnect power from the product by unplugging the power
cord from the electrical outlet.
If provided with a three-conductor power cord having a three-pin
attachment plug, plug the cord into a grounded (earthed) oulet.
Do not disable the power cord grounding pin. The grounding pin
is an important safety feature.
Å
WARNING: To reduce the risk of serious injury, read the Safety &
Comfort Guide. It describes proper workstation setup, posture, and
health and work habits for computer users, and provides important
electrical and mechanical safety information. This guide is located
on the Web at
Documentation Library CD that is included with the product.
1–10
www.hp.com/ergo
and on the hard drive or on the
Getting Started