Installation; Installing Windows Xp Service Pack 2; Preparing For Installation - HP Compaq NC4000 Software Manual

You will need the following items before installing:
A supported system with Microsoft Windows XP
Windows XP OS License for each PC
o
Microsoft Windows XP Service Pack 2
SP2 is available through Windows update, as a download from the Microsoft
o
website, or on CD from Microsoft.
The latest HP Support Software CD containing updated drivers and deliverables described in the
section "Installation of HP Drivers and Enhancements"
Optionally, the software can be downloaded from the HP website at
o
and burned onto a CD-R or CD-RW
Note
The HP Support Software CD is updated monthly and available by annual
subscription or as a one-time purchase. You can also download all files,
including the most current available ROM for the platform, from the HP
website www.hp.com. See Appendix A for information on determining the
current ROM version and how to update.

Installation

Installing Windows XP Service Pack 2

IMPORTANT
Follow the instructions in the order provided. Failure to complete these
steps in the proper order can result in an unsuccessful or unstable
installation.
This section provides guidelines for users who upgrade the preinstalled image of Microsoft Windows
XP to SP2.

Preparing for installation

If docked, undock the unit.
1.
Disconnect all external peripherals and remove all PC card devices.
2.
Connect AC power.
3.
To check and upgrade ROM BIOS for each system, follow the steps below.
4.
– Start the system using the current operating system (OS).
– Check the current ROM BIOS using Computer Setup or by pressing Fn+Esc after the OS boots.
– Compare the current ROM version date to the latest ROMPaq release date on the HP website to
ensure that you have the most recent version. If you do not have the most recent version, install
the latest system ROM BIOS.
Note
Refer to the online download and installation instructions to complete the
ROM upgrade.
www.hp.com
3