Mounting The Inverter - SolarEdge UL1741-SA Installation Manual

32

Mounting the Inverter

Mounting the Inverter
The inverter is supplied with a mounting bracket kit:
NOTE
Make sure the mounting surface or structure can support the weight of the
inverter.
CAUTION!
SolarEdge inverters and power optimizers can be installed at a minimum
distance of 50 m/ 164 ft from the shoreline of an ocean or other saline
environment, as long as there are no direct salt water splashes on the inverter or
power optimizer.
For SolarEdge inverters installed at a distance of 200 m / 655 ft. or closer to the
shoreline, special brackets purchased separately from SolarEdge and SS304
stainless screws are required.
ATTENTION!
Les onduleurs SolarEdge peuvent être installés à une distance minimum de 50m
de la ligne d'eau de l'océan ou autre environnement salin, tant qu'il n'y a pas
d'éclaboussements d'eau salée directs sur l'onduleur.
Pour les onduleurs SolarEdge installés à une distance de 200 m ou moins du
rivage, des supports spéciaux achetés séparément auprès de SolarEdge et des
vis inox SS304 sont nécessaires.
1. Determine the inverter mounting location, on a wall, stud framing or pole. It is
recommended to mount the inverter in a location protected from direct sunlight.
Single Phase Inverter with HD-Wave Technology Installation MAN-01-00541-1.4
Figure 15: Mounting bracket