HP Compaq 6830s Specification page 10

QuickSpecs
Memory
667 MHz or 800 MHz DDR2 SDRAM
Two DIMM slots supporting dual channel memory
DIMM sizes supported: 1024 MB and 2048 MB
Standard Memory
Optional Memory
Upgrades
Up to
1024 MB
2048 MB
3072 MB
4096 MB
8192 MB
NOTE: This chart does not represent all possible memory configurations. Due to the non-industry standard nature of some
third-party memory modules, we strongly recommend using only HP branded memory modules to ensure compatibility. If
you mix memory speeds, the system will perform at the lower memory speed. Full availability of 4 GB or more of memory
requires Windows Vista Business 64-bit or Linux. With Windows 32-bit operating systems, the amount of usable memory is
dependent upon your configuration, so that above 3 GB all memory may not be available due to system resource
requirements.
Memory Upgrades
1024 MB (1024 MB x 1)
2048 MB (2048 MB x 1 or 1024 MB x 2)
3072 MB (2048 MB x 1024 MB)
4096 MB (2048 MB x 2)
Support for up to 8192 MB of memory with the installation of optional DDR2 SDRAM memory kits.
Both memory slots are user accessible. Please refer to the Hardware and Software Guide for
installation procedures. Maximized dual-channel performance requires SODIMMs of the same size
and speed in both memory slots.
HP 1 GB (DDR2 667 MHz) SODIMM
HP 2 GB (DDR2 667 MHz) SODIMM
HP 1 GB (DDR2 800 MHz) SODIMM
HP 2 GB (DDR2 800 MHz) SODIMM
HP 4 GB (DDR2 800 MHz) SODIMM
DA - 13057 Worldwide QuickSpecs — Version 4 — 8.22.2008
Slot 1
1024 MB
1024 MB
2048 MB
2048 MB
4096 MB
HP Compaq 6830s Notebook PC
Slot 2
Empty
1024 MB
1024 MB
2048 MB
4096 MB
EM994AA
EM995AA
KT292AA
KT293AA
KT294AA
Page 10