System Board - HP Compaq 6730s Maintenance And Service Manual

System board

NOTE: The system board spare part kit includes the ExpressCard assembly and replacement thermal
material.
Description
For use only with HP Compaq 6730s Notebook PC models
For use only with computer models equipped with Intel processors (includes 256-MB of discrete
graphics subsystem memory)
For use only with computer models equipped with Intel processors with UMA graphics subsystem
with a GL40 system board
For use only with computer models equipped with Intel processors with UMA graphics subsystem
and a GL45 system board
For use only with HP Compaq 6735s Notebook PC models
For use only with computer models equipped with AMD processors with UMA graphics subsystem
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Switch cover and keyboard (see
d. Speakers (see
e. Display assembly (see
f. Top cover (see
g. USB connector module (see
h. Bluetooth module (see
i. Fan (see
j. RTC battery (see
Battery on page
Hard drive on page
Optical drive on page
Speakers on page
Display assembly on page
Top cover on page
USB connector module on page
Bluetooth module on page
Fan on page 81)
RTC battery on page
50).
51)
59)
Switch cover and keyboard on page
66)
67)
74)
78)
80)
Component replacement procedures
Spare part number
491976-001
491250-001
501354-001
494106-001
61)
77)
83